RANCANG BANGUN PROTOTIPE ALAT PENERIMA PAKET DARI KURIR EKSPEDISI
DOI:
https://doi.org/10.59134/jsk.v10i1.704Keywords:
Internet of Things, Package Security, Arduino Uno, ESP8266Abstract
Technological advances have driven the development of package delivery systems, particularly in e-commerce. However, challenges such as package loss and damage remain due to the lack of a secure receiving system. This study aims to design and build a prototype of an Internet of Things (IoT)-based package receiving device that can be accessed in real-time using the Telegram application. The research methods used include needs analysis, hardware and software design, and system testing. The hardware used includes an Arduino Uno as the main microcontroller, an ESP8266 as an IoT communication module, an ultrasonic sensor for package detection, a servo motor for the box opening and closing mechanism, and a push button for manual operation. The software was developed using the Arduino IDE and configured with a Telegram Bot to provide notifications to users. Test results show that this system is capable of performing well in receiving packages automatically, securing packages until they are picked up by the owner, and sending real-time notifications to users. Thus, this tool can be a solution in improving package receiving security in the digital era.
References
[1] Amril, I. T., Sutanto, V. A., & Gultom, B. (2023). Perancangan Sistem Monitoring Area Parkir Berbasis Arduino Uno untuk Mengetahui Ketersediaan Area Parkir. Prosiding Seminar Nasional Teknologi Komputer Dan Sains325, 1(1), 325–331.
[2] Bima Prakarsa, F., & Edidas. (2022). Rancang Bangun Alat Sortir Panen Ikan Lele Berbasis Arduino UNO R3. Jurnal Pendidikan Tambusai, 6(1), 1202–1218.
[3] Diwangkara, B. (2022). Rancang Bangun Uji Volume Air Pada Buah Coklat Kering Menggunakan Arduino. Jurnal Portal Data, 2(2), 1–14.
[4] Fadilasyah, D. A., & Suprianto, S. (2022). Sistem Informasi Penerimaan Paket Barang Dengan Menggunakan Framework Codeigniter di Apartemen East Coast Residence. Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi), 6(1), 88–97.
[5] Irawan, D., & Anshory, I. (2020). Implementasi Esp 32 Cam Dan Sensor Infrared Untuk Monitoring Pengunjung Dilokasi Wisata. Seminar Nasional Fortei7-5 Forum Pendidikan Tinggi Teknik Elektro Indonesia Regional VII, 95–99.
[6] Nadziroh, F., Syafira, F., & Nooriansyah, S. (2021). Alat Deteksi Intensitas Cahaya Berbasis Arduino Uno. Indonesian Journal of Intellectual Publication, 1(3), 142–149. https://doi.org/10.51577/ijipublication.v1i3.92
[7] Rafly, M., Iriawan, E., Sirenden, B. H., Rayhana, E., & Sains, F. (2024). Motor Servo Menggunakan Sensor MMA8451 Dan Busur Derajat ( Angle46 Measurement of The Design of The Servo Motor-Based Solar Cell Drive Using MMA8451 Sensor And Protactor ). 34(1), 1–7.
[8] Rismayana, A. H., Mustopa, M. S., & Rohmayani, D. (2022). Rancang Bangun Kotak Penerima Paket Menggunakan Barcode Berbasis Internet of Things (IoT). Journal Informatics and Electronics Engineering, 02(02), 35–40.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Istiqomah Sumadikarta, Alfisyahrin Alsya, Hernalom Sitorus, Bosar Panjaitan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
